|
Application: |
|
Designed to
protect electrical wiring in areas which may be
regularly hosed down or are otherwise very wet and also
in areas where serious corrosion problems exist. |
|
|
Construction: |
|
14 gauge
stainless steel Type 304. |
|
10 gauge
stainless steel end flanges. |
|
Seams
continuously welded and ground smooth, no holes or
knockouts. |
|
Smooth,
rounded edges on all sections and fittings prevent
damage to insulation. |
|
Mounting
channels welded horizontally to interior body sides at
top, bottom, and center. |
|
Stainless
steel continuous hinge. |
|
Stainless
steel external screw clamps assure complete
seal between covers and bodies. |
|
Screw clamps
are quick and easy to operate. |
|
Oil-resistant
gasket. |
|
Oil-resistant
gasket positioned between flanges when sections and
fittings are bolted together. |
|
A complete
selection of fittings are available. |
|
|
Finish: |
|
Brushed. |
|
|
Industry Standards: |
|
ETL Listed |
|
Conforms to
UL 870 Type 4X |
|
Conforms to
NEMA standard Type 4X |